PJ Flatdeck Gooseneck Trailers
Low-Pro Flatdeck w/ Singles (LS)
Low-Pro Flatdeck w/ Singles (LS)
Low-Pro Flatdeck w/ Singles (LS)
Specs
- 33" Deck Height
- 2 5/16" Adjustable Gooseneck Coupler
- 2- 10K Drop Leg Jacks
- Brakes on Both Axles
- 7K Axles feature Easy-Lube Hubs
- 235/80R16 10 Ply Radial Tires- 3520# rated/ea
- Side Step on Both Sides
- Spare Tire *Mount Included
- Rubrail & Stake Pockets
- Electric Breakaway w/ Charger
- Main Frame & Neck I-Beam is 12"x14 lb/ft
- 3" Forged Channel Crossmembers placed 16" O.C.
- 2" Treated Pine Decking
- Flush Mount LED Lights
- Sealed Wire Harness
- Cold Weather Wiring Harness
- NEW Twist Control *standard on 30' or longer
- Powdercoated
- Zinc Primed
Sizes
- 102" Wide x 20'-44' Long
Couplers
- 2 5/16" Adjustable Bumper Pull Ball Coupler- 25,000#
- 2 5/16" Square Gooseneck- 30,000#
- 3" Pintle- 36,000#
Axles
- Tandem or Tri-Axle
- 7,000# Axles (12"x2" Brakes)
- 8,000# Axles (12"x2" Brakes) Oil Bath *LX Model
Color
*Anything other than Black is Additional Charge
- Black Powdercoat
- Grey Powdercoat
- Red Powdercoat
- White Powdercoat
- Desert Tan Powdercoat
- Tractor Orange Powdercoat
- Industrial Green Powdercoat
- Industrial Yellow Powdercoat
- Jet Blue Powdercoat
- Slime Green Powdercoat
Low-Pro Flatdeck w/ Singles (LS)
Low-Pro Flatdeck w/ Singles (LS)
Tail Options
- Straight Deck w/ 8ft Slide In Ramps
- 5' Dovetail w/ 2 Flip Over Ramps
- 5' Dovetail w/ Monster Ramps
- 5' Dovetail w/ Powertail
Other Options
- Rough Oak Deck
- BLACKWOOD Rubber Infused Lumber
- Aluminum Rims for 8 Bolt, 7K Axles
- 12" O.C. Crossmembers
- Sliding Strap Ratchets
- Deck on the Neck
- 2 Speed Jacks
- Hydraulic Jacks
- 14 Ply Tire Upgrade
- Removable Stake Pocket D-Rings
- Side Mount Toolbox
- Riser Toolbox
- Side Mount Wood Rack
- 12,000# Winch
- 9,500# Super Winch
- Winch Plate
- Welded On D-Rings
- Ramp Support Arms to stand ramps up
- Under Frame Bridging *Standard 30'+
- New Twist Control *29' or shorter
Key Features
- The New formed I-Beam neck design features a formed I-Beam with an innovative construction that redistributes stress across the neck's frame resulting in fewer targeted stress points and add strength. In addition to the stress reduction, the unique shape provides a good looking upgrade.
- "Twist Control"- A unique T-shaped intersecting pipe support provides unique torque control. This construction has been tested to show a 60% reduction in flex compared to a traditional torque tube. This is standard on 30' and longer trailers.
- The bed frame is made up of 2"x6" tubing and a 4"x6" rear tube bumper. All the wiring is enclosed in the tubes to keep it from getting damaged by use.
- The rear flip over ramps have a special support arm that curls under the bumper to keep the trailer from lifting the rear of the truck while loading & are also spring assisted for ease of folding up.
Low-Pro Flatdeck w/ Duals (LD)
Low-Pro Flatdeck w/ Duals (LD)
Low-Pro Flatdeck w/ Duals (LD)
Specs
- 33" Deck Height
- 2 5/16" Adjustable Gooseneck Coupler-30,000#
- 2- 10K Drop Leg Jacks
- Brakes on Both Axles
- 10K, 12K, 15K, & 16K Axles are Oil Bath
- Adjustable Leaf Spring Suspension
- 235/80R16 10 Ply Radial Tires- 3520# rated/ea
- Side Step on Both Sides
- Spare Tire *Mount Included
- Rubrail & Stake Pockets
- Electric Breakaway w/ Charger
- Main Frame & Neck I-Beam is 12"x19 lb/ft
- 3" Forged Channel Crossmembers placed 16" O.C.
- 2" Treated Pine Decking
- Flush Mount LED Lights
- Sealed Wire Harness
- Cold Weather Wiring Harness
- NEW Twist Control *standard on 30' or longer
- Powdercoated
- Zinc Primed
Sizes
- 102" Wide x 20'-44' Long
Couplers
- 2 5/16" Adjustable Bumper Pull Ball Coupler- 25,000# *PL Model
- 2 5/16" Square Gooseneck- 25,000#-30,000#
- 3" Pintle *PL Model
Axles
- Tandem or Tri-Axle
- 10,000# Axles (12.25"x3.5" Brakes)
- 12,000# Axles (12.25"x5" Brakes)
- 15,000# Axles
- 16,000# Axles
*Air Ride Suspension is also available.
Color
*Anything other than Black is Additional Charge
- Black Powdercoat
- Grey Powdercoat
- Red Powdercoat
- White Powdercoat
- Desert Tan Powdercoat
- Tractor Orange Powdercoat
- Industrial Green Powdercoat
- Industrial Yellow Powdercoat
- Jet Blue Powdercoat
- Slime Green Powdercoat
Low-Pro Flatdeck w/ Duals (LD)
Low-Pro Flatdeck w/ Duals (LD)
Tail Options
- Straight Deck w/ 8ft Slide In Ramps
- 5' Dovetail w/ 2 Flip Over Ramps
- 5' Dovetail w/ Monster Ramps
- 5' Dovetail w/ Powertail
- 10' Hydraulic Dovetail *LY Model- See Below
Other Options
- Rough Oak Deck
- BLACKWOOD Rubber Infused Lumber
- 12" O.C. Crossmembers
- Sliding Strap Ratchets
- Deck on the Neck
- 2 Speed Jacks
- Hydraulic Jacks
- 14 Ply Tire Upgrade
- Removable Stake Pocket D-Rings
- Side Mount Toolbox
- Riser Toolbox
- Side Mount Wood Rack
- 12,000# Winch
- 9,500# Super Winch
- Winch Plate
- Welded On D-Rings
- Ramp Support Arms to stand ramps up
- Under Frame Bridging
- New Twist Control *29' or shorter
*LY Model:
PJ Hydraulic Dovetail has the same standard features and options as the normal Flatdeck Gooseneck.
- 10' Hydraulic Tail
- Uses (2) 5"x7.5"Short Stroke Cylinders to provide lifting capability
- Cylinders come with a swing away "fork style" lock for use when hauling
- 10,000# Lifting Capacity- from center of dovetail forward
- 4,000# Hauling Capacity- from center of dovetail forward
- Self Rising Rear Bumper
Key Features
- The New formed I-Beam neck design features a formed I-Beam with an innovative construction that redistributes stress across the neck's frame resulting in fewer targeted stress points and add strength. In addition to the stress reduction, the unique shape provides a good looking upgrade.
- "Twist Control"- A unique T-shaped intersecting pipe support provides unique torque control. This construction has been tested to show a 60% reduction in flex compared to a traditional torque tube. This is standard on 30' and longer trailers.
- The new HD adjustable suspension will help increase the longevity and performance of the trailer with the ability to adjust the trailer alignment on the fly and give you easier maintenance. With a 30,000# rating you know it can handle most axle sizes.
- The bed frame is made up of 2"x6" tubing and a 4"x6" rear tube bumper. All the wiring is enclosed in the tubes to keep it from getting damaged by use.
- The rear flip over ramps have a special support arm that curls under the bumper to keep the trailer from lifting the rear of the truck while loading & are also spring assisted for ease of folding up.
- The 10K axles have 3.5" Drum Brakes & the 12K axles hand 5" Drum Brakes
- Hydraulic Disc instead of Electric Brakes are Available upon request.
