PJ Pintlehook Trailers

Low-Pro Pintle w/ Duals (PL)

Low-Pro Pintle w/ Duals (PL)

Low-Pro Pintle w/ Duals (PL)

Specs

33" Deck Height
2- 10K Drop Leg Jacks
Brakes on Both Axles
10K 12K, 15K, & 16K Axles are Oil Bath Axles
Dexter Adjustable Leaf Spring Suspension
235/80R16 10 Ply Radial Tires- 3520# rated/ea (View)
Stowable Side Step on Both Sides
Rubrail & Stake Pockets (View)
Electric Breakaway w/ Charger
Tongue is 12"x19 lb/ft
3" Forged Channel Crossmembers placed 16" O.C.
2" Treated Pine Decking
Flush Mount LED Lights (View)
Sealed Wire Harness
Powdercoated
Zinc Primed
Cold Weather Wiring Harness
*NEW Twist Control (Standard on 30' or Longer)

Sizes

102" Wide x 16'- 44' Long

Couplers

2 5/16" Adjustable Bumper Pull Ball Coupler- 25,000# (View)
3" Pintle Eye Coupler- 36,000# (View)

Axles

Tandem or Tri-Axle w/ Dual Wheels
- 10,000# Axles (12.25"x3.5" Brakes)
- 12,000# Axles (12.25"x5" Brakes)
- 15,000# Axles
- 16,000# Axles
*Disc Brakes available on all sizes

*Air Ride Suspension is also available

Color

*Anything other than Black is Additional Charge

Black Powdercoat (View)
Grey Powdercoat (View)
Red Powdercoat (View)
White Powdercoat (View)
Desert Tan Powdercoat (View)
Tractor Orange Powdercoat (View)

Low-Pro Pintle w/ Duals (PL)

Low-Pro Pintle w/ Duals (PL)

Tail Options

Straight Deck w/ 8ft Slide In Ramps (View Picture 1, Picture 2)
5' Dovetail w/ 2 Flip Over Ramps, HD Gussets
5' Dovetail w/ 2 Flip Over Ramps (View)
5' Dovetail w/ 3 Flip Over Ramps, HD Gussets
5' Dovetail w/ 3 Flip Over Ramps (View)
5' Dovetail w/ Monster Ramps (View Picture 1, Picture 2, Picture 3)
5' Dovetail w/ Powertail (View Picture 1, Picture 2, Picture 3)
10' Hydraulic Dovetail (View Picture 1, Picture 2, Picture 3)

Other Options

Rough Oak Deck (View)
BLACKWOOD Rubber Infused Lumber
Electric / Hydraulic Disc Brakes -on board pump unit (View)
12" O.C. Crossmembers
Sliding Strap Ratchets (View)
2 Speed Jacks (View)
Hydraulic Jacks
Torque Tube (View)
Weld On Strap Ratchets (View)
14 Ply Tire Upgrade (View)
Removeable Stake Pocket D-Rings (View Picture 1,Picture 2)
Side Mount Toolbox (View Picture 1,Picture 2)
Side Mount Wood Rack (View Picture 1,Picture 2, Picture 3)
12,000# Winch (View)
8,500# Super Winch (View)
Winch Plate (View)
Welded On D-Rings (View)
LED Reverse Lights (View)
Ramp Support Arms to stand ramps up (View Picture 1, Picture 2,Picture 3)
6" Spread- longer equalizer
Under Frame Bridging
72" Axle Spread

Key Features

12" I-Beam Frame & Neck w/ significant gusseting to support the frame to riser transition.
Twist Control- A unique T-shaped intersecting pipe support provides unique torque control. This construction has been tested to show a 60% reduction in flex compared to non-torque tube trailer frames, and up to a 20% reduction compared to a traditional torque tube. This is standard on 30' or longer trailers.
The bed frame is made up of 2"x6" tubing and a 4"x6" rear tube bumper. All the wiring is enclosed in the tubes to keep it from getting damaged by use.
The rear flip over ramps have a special support arm that curls under the bumper to keep the trailer from lifting the rear of the truck while loading & are also spring assisted for ease of folding up.
The 10K axles have 3 1/2" Drum Brakes, or the 12K axles have 5" Drum Brakes.
Hydraulic Disc Brakes instead of Electric Brakes are available upon request.